Home >> News

Application of disposable medical non-woven fabric

Oct. 12, 2019

The packaging process is an important part of the daily work in the disinfection supply center. The purpose of packaging is to establish a sterile barrier that ensures the sterility of the device itself in all conditions, such as the intended application, shelf life, transport and storage, after sterilization.

Medical non-woven fabrics are different from ordinary non-woven fabrics and composite non-woven fabrics. Ordinary non-woven fabrics do not have antibacterial properties; composite non-woven fabrics have good waterproof effect and poor gas permeability, and are generally used for surgical gowns and surgical sheets; medical non-woven fabrics are spunbond, meltblown, and spunbond (SMS) processes. It is pressed and pressed, has the characteristics of bacteriostatic, hydrophobic, ventilating and no dandruff. It is used for the final packaging of sterilized articles, and it can be used once and without cleaning.

Excellent medical non-woven fabrics generally need to adopt SMMMS three-layer melt-blown layer structure. The common medical non-woven fabrics in the industry use SMS single-layer melt-blown layer structure. In comparison, the three-layer structure has antibacterial properties. It is better than a single layer structure. It is not a medical ordinary non-woven fabric, and there is no melt-blown layer in the middle, and it cannot perform the bacteriostatic action.

Excellent medical non-woven fabrics need to be applied to a variety of sterilization methods at the same time. It is best to use three kinds of sterilization methods: pressure steam, ethylene oxide and hydrogen peroxide. Ordinary non-medical non-woven fabrics cannot be sterilized.

Excellent medical non-woven fabrics, the production process needs to pass the ISO13485 international medical product quality control system certification, real-time online inspection at every step of the production process. This will help each piece of non-woven fabrics sent to the hospital, with relevant batch inspection reports. Ordinary non-medical non-woven fabrics do not need to meet the medical level inspection.

Excellent medical non-woven fabrics will use green, safe and environmentally friendly PP particles, and it is best to issue reports on relevant hygiene and toxicological requirements. Ordinary non-medical non-woven fabrics can not withstand high-humidity and high-temperature sterilization, and of course, do not need to produce relevant toxicological reports.

With the continuous updating and rapid development of packaging materials for sterilized articles, medical non-woven fabrics have gradually entered the disinfection supply centers of various hospitals at various levels as the final packaging materials for sterilized articles.

Infection control is the most important issue in the surgical procedure. The disposable medical nonwovens used for infection control are commonly found in the following products:

Disposable bed sheet rolls: Mainly used to protect patients from infection and reduce the risk of infection at the surgical site.

Surgical film: It is used for surgery with long operation time and high risk of infection, and it can protect the sterility of skin for a long time.

Surgical gowns, masks, hats, surgical gloves: mainly used to protect medical staff and avoid cross-infection.

Cloth: Wrap the surgical supplies for disinfection and sterilization.

Nonwoven surgical hand towel: Preoperative surgical hand washing.

The main factors driving disposable medical nonwovens:

Increasing attention to nosocomial infections: Repetitive use of non-woven fabrics is likely to cause the penetration of microscopic and microbes, which is an important cause of postoperative inflammation, granuloma, infection and adhesion;

Promoted by European EN13795 and US AAMI PB70 regulations: These regulations refer to protective performance to a very high level and serve as an important basis for operating room consumables.

Prevent cross-infection during surgery and protect the health of patients and medical staff. Please choose to use disposable non-woven products. Our company is mainly engaged in disposable medical products, quality assurance, and authoritative certification. It is deeply loved by overseas customers. If you have any needs, please feel free to contact us.

Application of disposable medical non-woven fabric

Disposable Bed Sheet Rolls


Previous: What are the advantages of non-...

Next: One-time roll bed sheet has the...